Comtech EF Data C5 - Manual (Page 296)

Remote Control Operation C5/K1/K3 Integrated Satellite Terminal System
B–12 Rev. 0
ASYNC Receive
Overhead
Channel Parity
(RX ASYNC
Overhead only) Command:
Response:
Status:
Response:
<add/ROCP_xxxx'cr'
>add/ROCP_xxxx'cr''lf']
<add/ROCP_'cr'
>add/ROCP_xxxx'cr''lf']
Where: xxxx = ODD, EVEN, or NONE.
ASYNC Transmit
Communications
Type (TX
ASYNC
Overhead only) Command:
Response:
Status:
Response:
<add/TCT_xxxxxxxx'cr'
>add/TCT_xxxxxxxx'cr''lf']
<add/TCT_'cr'
>add/TCT_xxxxxxxx'cr''lf']
Where: xxxxxxxx = RS232, RS485, (4 WIRE),
RS485_2W (2 WIRE).
ASYNC Receive
Communications
Type (RX
ASYNC
Overhead only) Command:
Response:
Status:
Response:
<add/RCT_xxxxx'cr'
>add/RCT_xxxxx'cr''lf']
<add/RCT_'cr'
>add/RCT_xxxxx'cr''lf']
Where: xxxxx = RS232 or RS485.
Transmit Data
Phase Command:
Response:
Status:
Response:
<add/TDP_xxxx'cr'
>add/TDP_xxxx'cr''lf']
<add/TDP_'cr'
>add/TDP_xxxx'cr''lf']
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
Receive Data
Phase Command:
Response:
Status:
Response:
<add/RDP_xxxx'cr'
>add/RDP_xxxx'cr''lf']
<add/RDP_'cr'
>add/RDP_xxxx'cr''lf']
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
CTS Delay Time Command:
Response:
Status:
Response:
<add/CTSD_xx'cr'
<add/CTSD_xx'cr''lf']
<add/CTSD_'cr'
>add/CTSD_xx'cr''lf']
Where: xx = 0 to 60 (number of seconds).