Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual - Manual (Page 113)

MINIMAC Rack Management System Installation
Rev. 0 2–11
2.4 Rack Installation
Note: System installation varies from user to user depending on individual systems.
The following rack installation (Figure 2-8) is typical and is identified as:
Adaptive Broadband MiniMAC. All installation requirements are explained in this
system.
Install the furnished CPU cable from the port expander (Star Gate

, MOXA,

or
equivalent) to the MiniMAC CPU (Figure 2-9).
Install the Rainbow Hardware Key to the MiniMAC CPU at the LPT1 position. If the
MiniMAC system has a printer, install the printer cable to the Rainbow Hardware Key at
LPT1.