Comtech EF Data MDX420 SkyWire Manual - Manual (Page 43)

MDX420 SkyWire™ Satellite Network Gateway Terminal Screens
MN-MDX420 Revision 6 6–5
DATA RATE (bps) {Refer to Technical Specs for Data Rates}
Allows the user to set the Data Rate in bps steps via the Terminal Screen
SYMB RATE (sps) {256000 - 10000000}
Allows the user to set and or view the Symbol Rate.
INNER FEC Turbo{.710, .793}
Allows the user to select the RX Code Rate
DEMODULATION {QPSK, 8PSK}
Allows the user to select the demodulation type.
RESET REMOTES CAUTION: Resetting the remote will disable the burst demodulator and erase the
entire configuration table associated with that burst demodulator. This selection
should only be used to reset the burst demodulator to a known starting point or to
erase a previous configuration.