11mbps wireless access point user's manual – ConnectGear WA300 User Manual
Page 29
Advertising
11Mbps Wireless Access Point User's Manual
4.
The download will begin. Key in the new firmware file name and location or click
browsing to find the file in your computer.
5.
After entering the file information, click OK to continue.
6.
The downloading begins.
7.
After download finished, the AP will reset automatically, and the left indicator “DIAG” on
AP will be off and then begin flashing. When the indicator “ DIAG” is always green
instead of blinking, the firmware upgrade is completed and successfully.
29
Advertising