Contemporary Control Systems Compact Managed Switches Software Manual for Console Access - Manual (Page 40)

TD020850-0MG
40
4.3.9.2.5.1 Configure STP Port Parameters
Figure 32 displays the default settings for the
Configure STP Port Parameters screen.
This example is for an 8-port switch. A Continue option for accessing more ports would
appear just above the dashed line for 16- and 24-port switches. The parameters are :
Path Cost (explained in Section 4.2.1.9.2.6.1)
Priority (explained in Section 4.2.1.9.2.6.2)
Admin Edge (explained in Section 4.2.1.9.2.6.3)
Figure 32 — Configure STP Port Parameters