Scoreboard options, Changeable team name captions, Section 6 – Daktronics BA-2515-31 DistaView Outdoor LED Scoreboard User Manual
Page 33

Figure 25: Changing Scoreboard Captions
Team name caption kits contain
hardware for one caption only and
consist of an upper caption retainer,
a lower caption retainer, a
changeable caption panel and
screws. The standard HOME and
GUEST captions are applied directly
to the face of the scoreboard. Team
name captions are on changeable
panels that fit into retainers
mounted above and below the
HOME and GUEST captions. If these
retainers are not already present,
attach the retainers included with
the caption kit.
To install a changeable panel:
1. Insert the screws on the caption changing pole into the keyholes on the panel.
2. Lift the panel all the way up into the upper retainer and then insert the bottom of the
panel into the lower retainer (Figure 25).
3. Take the screws on the caption changing pole out of the keyholes.
Reverse this procedure to remove the caption panel.
The caption changer pole is extendable. Loosen the ring tightener and extend the pole to the
desired length, and then tighten the ring before lifting the caption.
CAUTION:
The aluminum caption changer can conduct electricity. Do not use it within 20-
feet of power lines.
Also be careful when using the caption changer in high or gusting winds. Wind may catch
the panel and unhook it from the changer or make it difficult to maintain a grip on the pole.
Hold the pole tightly in windy conditions.