DFI ES121-LR - Manual (Page 39)

39
5
Ports and Connectors
DC-in 12V
This jack provides maximum of 60W power and is considered a low power solu-
tion. Connect a DC power cord to this jack. Use a power adapter with 12V DC
output voltage. Using a voltage higher than the recommended one may fail to
boot the system or cause damage to the system board.
Important:
Every power supply has its minimum load of power. If you use a greater
than 150W power supply, the power consumed by the system board may
not attain its minimum load causing instability to the entire system.