DFI SB332-C - Manual (Page 16)

www.dfi .com
16
Chapter 2 Hardware Installation
Chapter 2
These jumpers are used to select the power of the USB ports. Selecting +5V_standby will
allow you to use a USB device to wake up the system.
USB Power Select
USB 0-1/8-9
(JP4)
USB 2-3/4-5
(JP5)
2-3 On:
+5V_standby
1-2 On: +5V
(default)
1
3
2
1
3
2
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Power-on Select
To power-on via WOL after G3:
1. Set JP8 pins 2 and 3 to On.
2. Set the “After G3” field to Power Off/WOL.
3. Set the “GbE Wake Up From S5” to Enabled.
The BIOS fields are in the “South Bridge” submenu (Chipset menu) of the AMI BIOS utility.
To power-on via AC Power:
1. Set JP8 pins 2 and 3 to On.
2. Set the “After G3” field to Power On.
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power; or
Power-on via WOL after G3
JP8
3
1
2
3
1
2
USB 10-11
(JP6)
2-3 On:
+5V_standby
1-2 On: +5V
(default)
1 3 2 1 3 2
1
3
2
1
3
2
2-3 On:
+5V_standby
1-2 On: +5V
(default)