DFI SB332-C - Manual (Page 51)

www.dfi .com
51
Chapter 4 Supported Software
Chapter 4
3. Setup is currently installing
the driver. After installation
has completed, click Next.
4. After completing installa-
tion, click Finish.
MyGuard Hardware Monitor
5. Setup is ready to install the
utility. Click Next.
1. Locate for the MyGuard
folder in the provided disc.
2. In the MyGuard folder,
right-click on the “setup”
file.
3. Select Run As Administrator.
4. Double-click Setup.
Important:
Perform steps 1-3 only when using Windows 7 or Windows Vista.