Chapter 3, Chapter 3 bios setup – DFI SB332-C User Manual
Page 36
www.dfi .com
36
Chapter 3 BIOS Setup
Chapter 3
Third Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Set parameters of Serial
Port 7(COMG).
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Second Super IO Confi guration
Super IO Chip
Serial Port 7 Confi guration
Serial Port 8 Confi guration
Serial Port 9 Confi guration
Serial Port 10 Confi guration
Advanced
Fintek F81217
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port 8 Confi guration
Serial Port
Device Settings
Change Settings
Advanced
[Enabled]
IO=208h; IRQ=11;
[Auto]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port 7 Confi guration
Serial Port
Device Settings
Change Settings
Advanced
[Enabled]
IO=200h; IRQ=11;
[Auto]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port 9 Confi guration
Serial Port
Device Settings
Change Settings
Advanced
[Enabled]
IO=210h; IRQ=10;
[Auto]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Serial Port 7 Configuration to Serial Port 10 Configuration