Diamondback 500ER - Manual (Page 27)

500Er Owner’s Manual
27
ƒ “Cool Down” will display above the brickyard.
ƒ 3:00 minutes will be displayed in the Time field.
ƒ The Pulse display will show a heart rate is a signal is detected via the touch heart rate sensors.
ƒ The Data Display fields will continue to track Calories and Distance as well as the current values for Speed,
Resistance Level, Strides‐per‐minute and Watts.
ƒ The user may adjust the resistance level from 1 to 5 only during the Cool Down program.
ƒ Press the START key at any time to end the Cool Down session and restart the previous program.
ƒ Press the STOP key to skip the Cool Down mode and activate the Workout Summary
ƒ When three (3) minutes have elapsed or the STOP key is pressed, Cool Down will end and the Workout
Summary will be displayed.
See the Operating Notes section (page 25) for more information regarding Pause, Reset or Save functions.
Workout Summary
For additional user feedback, the 500Er console provides a comprehensive Workout Summary immediately following
the completion of the Cool Down session. Total workout data will be displayed for one (1) minute.
During the Workout Summary display session:
ƒ The total workout time will be displayed in the Time field.
ƒ The user’s average pulse rate throughout the workout will be displayed (if one was detected and recorded).
ƒ The Data Display will fields will be lit with the total Calories burned, average Speed, total Distance traveled,
average Strides‐per‐minute, and average Watts accumulated during the workout.
ƒ After one (1) minute, the Workout Summary will time out and the console will reset.