Diamondback 500ER - Manual (Page 31)

500Er Owner’s Manual
31
ƒ Press the STOP key once to immediately enter the Cool Down mode. Refer to the section titled Cool Down on
page 25 for more information.
ƒ Press STOP twice to enter the Workout Summary mode.
ƒ Pressing STOP three times will reset the console and return to the Idle mode, or press START to restart the
program.
Ending a Classic Program
When the program time has elapsed or the STOP key is pressed, the Cool Down program will launch, followed by the
Workout Summary display. The Workout Summary will be displayed for sixty (60) seconds.
Press START to restart the previous program or STOP to return to Idle mode.
TARGET HEART RATE PROGRAM
Diamondback’s Target Heart Rate program can also described as a heart rate control program. Heart rate control
programs automatically increase and decrease the load during the workout to stay within four (4) BPM (Beats‐per‐
minute) of the selected target.
For example, if the heart rate target is 132 BPM, and the user’s pulse begins to fall, the 500Er computer will slowly
increase the load. Eventually, the amount of work being performed by the user will increase and so will the heart
rate. Conversely, if the user’s heart rate climbs above the target zone, the load will be reduced, ultimately
decreasing the user’s heart rate.
The advantages of heart rate control programs are the simplicity and accuracy by which the ideal cardio‐vascular
training zone is maintained thereby offering a very efficient workout.
For the Target Heart Rate programs to operate, the computer must receive a heart rate signal from the touch heart
rate sensors. If no signal is detected, the Pulse field will display ”‐ ‐ ‐“ and the heart symbol will not be lit.