Dove Systems Starport DOS - Manual (Page 13)

13
SCREEN DISPLAY EXAMPLES
A. Cues
------------------------------------------------------------------------------
GoXY Stop Q+ Q- Patch Cues QSheet GO STOP BLACK Sbs QSbs Main GoAB Stop Q+ Q-
------------------------------------------------------------------------------
Cue # X Down Delay Y Up CueInfo Cue # A Down Delay B Up CueInfo
X 0.0 0.0s 0.0s 0.0s A----- ------ ------ ------ --------
Y 1.0 8.2s 0.0s 8.2s B----- ------ ------ ------ --------
------------------------------------Channels----------------------------------
1 9 17 25 33 41 49 57 65 73 81 89
2 10 18 26 34 42 50 58 66 74 82 90
3 11 19 27 35 43 51 59 67 75 83 91
4 12 20
FL 28 36 44 52 60 68 76 84 92
5 13 21 29 37 45 53 61 69 77 85 93
6 14 22
50 30 38 46 54 62 70 78 86 94
7 15 23 31 39 47 55 63 71 79 87 95
8 16 24 32 40 48 56 64 72 80 88 96
--------------------------------------Cues------------------------------------
X
0.0 6.0 12.0 18.0 24.0 30.0 36.0
Y 1.0 7.0 13.0 19.0 25.0 31.0 37.0
2.0 8.0 14.0 20.0 26.0 32.0 38.0
3.0 9.0 13.0 21.0 27.0 33.0 39.0
4.0 10.0 14.0 22.0 28.0 34.0 40.0
5.0 11.0 15.0 23.0 29.0 35.0 41.0
------------------------------------------------------------------------------
PRO-MX A/DMX Version 3.11 No StarPort Installed - Demo Mode
------------------------------------------------------------------------------
Load Dwn Dly Up Ins Cpy StgQ NxtQ Levl% Loop Live Info Blnd Clr Del Page Load
------------------------------------------------------------------------------
This is the default screen when the program first loads. It is used primarily for setting channel levels to
save as a stage "look." The upper window shows cue levels, the lower active cues and their fader
status. In this example, channel 20 is up full and channel 22 is at 50%. Cue 0.0 has been marked and
is highlighted. When "Load" is selected at the lower left hand corner, Cue 0.0 will be overwritten. When
"GoXY" is selected at the right hand corner, a crossfade will commence, taking 8.2 seconds to complete.