Check the tire pressure, Connecting the battery (electric start models) – DR Power Dual Action 15-Ton Gas (Aug 2011 - Present) User Manual
Page 15
CONTACT US AT www.DRpower.com 15
Check the Tire Pressure
Tools Needed:
Tire Pressure Gauge
Air Compressor
1. Remove the Valve Stem Protective Cap (Figure 24) and check the Tire
pressure with a Tire Pressure Gauge.
2. Check what the manufacturers recommended pressure is that is stamped on
the side of the Tire.
3. If the pressure is too low, add air through the Valve Stem with an air hose.
4. Replace the Valve Stem Protective Cap when finished.
Connecting the Battery (electric start models)
1. Connect the Black Negative Terminal onto the negative Battery Lug (Figure
25).
Figure 25
Negative
Terminal
Negative
Battery Lug
Do not over inflate the tires. Inflate to the manufacturers recommended
pressure found on the tires.
Valve Stem
Protective Cap
Figure 24