DR Power TPH-184CHP - Manual (Page 8)

• Repair or replace any damaged parts before restarting and operating the machine.
• If the machine should start to vibrate abnormally, immediately stop the tractor and wait for all moving parts to come
to a complete stop and inspect for the cause. Vibration is generally a warning sign of trouble.
• Disengage the P.T.O. drive shaft when leaving the operating position.
• Disengage the P.T.O. when moving the shredder/chipper.
• Stop the tractor and disconnect the P.T.O. drive shaft when making any repairs, adjustments and inspections.
• Take all possible precautions as recommended by the manufacturer when leaving the machine unattended. Stop
the tractor and remove the key if so equipped.
• Before cleaning, repairing, or inspecting, shut off the tractor and make certain the flywheel and all moving parts
have come to a complete stop.
• Never run this machine in an enclosed area as the exhaust from the tractor engine contains carbon monoxide,
which is an odorless, tasteless, and deadly poisonous gas.
• Keep all guards and safety devices in place and operating properly. Do not operate the machine if all safety
guards are not in place.
• Do not use the unit with the shredder hopper or chipper hopper removed.
• Keep children and pets away.
• Tragic accidents can occur if the operator is not alert to the presence of small children.
• Keep children out of the work area and under the watchful eye of a responsible adult other
than the operator.
• Be alert and turn the unit off if a child enters the area.
• Never allow children to operate the shredder/chipper.
• Do not overload or attempt to shred or chip material beyond manufacturers recommendation. Personal injury or
damage to the machine could result.
• Never operate the machine at high transport speeds or on hard or slippery surfaces.
• Never allow bystanders near the unit while running.
• Only use accessories approved for this machine by the manufacturer. Read, understand, and follow all the
instructions provided with the approved accessory.
• Only operate unit in good daylight. Do not operate unit at night or in dark areas where your vision may be
impaired.
• Use extreme caution when reversing or pulling the machine towards you.
• This machine is designed to operate at 540 RPM only. Do not operate at a faster speed which may cause serious
injury to the operator or bystanders and could cause damage to the machine which will not be covered under
warranty.
• Never pick up or transport the machine while the P.T.O. drive shaft is engaged.
• Do not operate while under the use of alcohol, drugs, or medication. A clear mind is essential for safety.
• Do not allow anyone who is not alert to operate this machine.
• When feeding material into this equipment, be extremely careful that pieces of metal, rocks, or other foreign
objects are not included. Personal injury or damage to the machine could result.
• Keep area of discharge clear of people, animals, buildings, glass or anything else that will obstruct clear
discharge, cause injury or damage. Wind can also change discharge direction, so be aware.
• Do not allow an accumulation of processed material to build up in the discharge area as this will prevent proper
discharge and can result in kickback from the shredder hopper or chipper chute.
8