DR Power Backhoe 2008 - Manual (Page 36)

32 DR ®
DIRT BOSS™ TOWABLE BACKHOE
Figure 36
Greasing the Backhoe
Economical and efficient operation of any machine is dependant upon regular and proper lubrication of
all moving parts with a quality lubricant. All parts provided with grease fittings should be lubricated with
a good quality chassis lube type grease. If any grease fittings are missing, replace them immediately.
Tools and Supplies Needed:
• Grease Gun (general purpose grease)
• Rags
1. Wipe any grease or dirt from all Grease Fittings with a rag.
2. Grease the Backhoe at all seventeen Grease Fittings (Figure 36) until you notice grease escaping
from the joint.
3. Wipe off any excess grease with a rag.