ESI EX8000 - Manual (Page 8)

MaXiO XD EX8000
8
· Please verify your I/O connections before you change the audio routing.
· Please temporarily turn off your amplifier or active monitor speakers when you change the audio
routing. !
CAUTION
3.2.2 [MODE 1] AES/EBU to analog / analog to AES/EBU
[MODE 1] allows you to use EX8000 as 8 channel AD converter with 4 AES/EBU outputs and
simultaneously as 8 channel DA converter with 4 AES/EBU inputs.
Please note that the system clock can be set to INTERNAL (which means that EX8000 will
generate the master clock), to DIGITAL IN (which means that the clock from input 1, 2, 3 or 4 is
used) or to EXTERNAL (which means that a Word Clock source will be used as system clock).
You must set up the system clock correctly for your specific setup to make this audio routing mode
work properly. A detailed description can be found under 3.3 System Clock in this manual.
E.D.I OUT E.D.I E.D.I IN
DIGITAL
8CH 24-bit/192kHz 8CH 24-bit/192kHz ANALOG
ADAT
DIGITAL OUT E.D.I DIGITAL IN
DIGITAL
ANALOG
ADAT
E.D.I
DIGITAL
ANALOG
ADAT
E.D.I
DIGITAL
ANALOG
ADAT
~ Professional
{ Consumer
ANALOG OUT
8 XLR balanced OUT
8 TRS balanced OUT
ADAT OPTICAL OUT
~ Normal : 8CH 24-bit/48kHz
{ S/MUX 2 : 4CH 24-bit/96kHz
{ S/MUX 4 : 2CH 24-bit/192kHz
ANALOG IN
ADAT OPTICAL IN
4 XLR Out
4 RCA Out 4 XLR In
4 RCA In
8 XLR / TRS IN
ANALOG
~ Professional
{ Consumer
DIGITAL

MIC / LINE, GAIN
ADC DAC

DIGITAL ~ Normal : 8CH 24-bit/48kHz
{ S/MUX 2 : 4CH 24-bit/96kHz
{ S/MUX 4 : 2CH 24-bit/192kHz