ESI UGM96 - Manual (Page 5)

UGM96 ESI
5
2.2 Rear Panel
The rear panel of UGM96 contains the following items from left to right:
- primary headphone and line level output; use this output to connect UGM96 to your amplifier or
active monitors a using a 1/4" TRS stereo cable or use it to connect a pair of stereo headphones to
UGM96
- mini USB connector; use this connector to connect UGM96 to your PC or Mac using the
supplied USB cable
- secondary headphone output, providing the same signal as the primary headphone output; use
this output to connect a pair of stereo headphones to UGM96
2.3 Minimum System Requirements
PC
- Intel Pentium III 600MHz CPU or equivalent AMD CPU
- 512 MB RAM
- Direct X 8.1 or higher
- one available USB port
- DVD-ROM drive (for Cubase LE 4 installation)
- internet connection (for Cubase LE 4 and Studio Devil VGA activation)
- recent version of Microsoft Windows XP (SP2 or higher) or Windows Vista (32-bit)
Mac
- Power Macintosh G4 or higher
- one available USB port
- 512 MB RAM
- DVD-ROM drive (for Cubase LE 4 installation)
- internet connection (for Cubase LE 4 and Studio Devil VGA activation)
- Mac OS X 10.4 or higher
3. Installation
Before installing the drivers of UGM96, we recommend to check on the download section of
www.esi-audio.com for updated drivers.