ESI UGM96 - Manual (Page 7)

UGM96 ESI
7
You can now finally click Next on the ESI U46 Audio Driver Setup dialog. The installation is now
finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification area as
shown below.
If yes, the driver installation has been completed successfully.
3.2 Windows Vista
Disconnect UGM96 before you install the driver if it has been connected already. Then launch
setup.exe from the Windows folder of the included Installation CD or from a download of a recent
driver from our website.
When launching the installation, Windows Vista might prompt a security message. Make sure to
allow the installation. You will then see a dialog as shown on the left picture below. Click Next.
You can define the target directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you will see a Windows Security
dialog box once or several times that asks you for confirmation to install the driver software.
Confirm any such dialog with Install.