Exacq exacqVision Virtual User Manual - Manual (Page 33)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 33 of 44
4/12/2013
sudo /opt/vmware/share/vami/vami_set_network eth1 STATICV4 10.10.1.30 255.255.255.0 10.10.1.254
The output would look similar to the following:
8. If a DHCP server is located on the management network, eth0 lose its fixed IP address. Reset the interface using these two
commands:
sudo ifdown eth0; sudo ifup eth0
9. Open a web browser and navigate to the appliance’s web interface. Log in as admin and click on the Network tab. Under
Status, note that the two adapters are correctly configured to two separate networks.