Exacq exacqVision Virtual User Manual User Manual
Page 36
www.e
x
acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 36 of 44
4/12/2013
Observe the Memory Usage counter and verify that is it stable. If you are near your memory capacity during peak operation,
consider moving virtual machines to a different host and adding memory to the host. More detailed information can be viewed by
opening the Performance Tab. Some of the key indicators for memory include the Balloon and Swap charts. Both of these values
should be 0, and values here indicate that the host is borrowing and using disk for memory, which negatively affects performance.
Hosts share physical network connections among virtual machines. Depending on the number of cameras recording to the VMS,
significant amounts of bandwidth might be needed. Scroll to the bottom and observe the Network (MBPS) usage. This chart provides
a quick overview of the average rate at which data is transmitted and received across all NIC instances connected to the host. High
values here might indicate that packets are being dropped, which could indicate a bottleneck in the network.