Exacq exacqVision Virtual User Manual - Manual (Page 6)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 6 of 44
4/12/2013
6
Upgrading Hardware
The exacqVision Virtual Appliance is deployed with minimal hardware requirements. As your system grows, the virtual machine must
be monitored, and resources might need to be added.
NOTE: Adding network adapters (see section 10) and adding virtual disks (see section 9) do not require a restart of the server.
Adding CPUs and memory requires a shutdown of the system.
1. From the vSphere Client open the VMs and Template View, right-click on the exacqVision Virtual appliance.
2. From the pop-up menu, choose Power and then Shut Down Guest. This shuts down the server appropriately.
text
3. After the server is shut down, right-click the server and choose Edit Settings. Alternatively, you can simply click on Edit
Virtual Machine Settings under Basic Tasks on the virtual machine’s Getting Started tab.