Fat Bagger 09BRKS Backrest Hardware Relocation Kit 09-13 - Manual (Page 2)

IMAGE D
4. INSTALL STOCK QUICK RELEASE ONTO SUPPLIED CHROME PLATES (SEE IMAGE D)
5. REMOVE SADDLEBAGS AND REMOVE STOCK BOLTS FROM SADDLEBAG SUPPORT
BRACKET (SEE IMAGE E)
6. USING BOLTS THAT CAME WITH THE KIT, INSTALL STAINLESS STEEL DOCKING POSTS
FROM KIT IN LOCATION OF THE STOCK BOLT THAT WAS JUST REMOVED (SEE IMAGE F)
IMAGE E
IMAGE F
7. RE-INSTALL SADDLEBAGS THEN PUT BACKREST INTO PLACE.
NOTE: FBI ALSO HAS A REMOVEABLE TRUNK MOUNT TO MOUNT ON OE TOUR PAK TO
ALLOW USING THE SAME DOCKING POINTS AS THIS UNIT. CALL FOR INFORMATION.