Fat Bagger 200MM FAT TIRE KIT 2008 - Manual (Page 19)

www.fatbaggers.com 641-774-7499
Grinding caliper so it does not
contact the rim and damage it. Finished grinding caliper.
48. Install rear wheel axle half way through wheel, go to caliper side, install caliper and rotor at the
same time, and tighten one of the rotor bolts. Use stock spacers in between hub and brake
caliper, use supplied spacer in between brake caliper and swing arm. NOTE: Spacers vary with
wheel manufacturer.
Sliding axle through swingarm. Axle coming through hub on
right side. Lining up rotor and caliper for
axle to slide through.
47. Refer to chart for wheel spacing.
Image F
2007
Sprocket
Side #1
Inbetween
Hub and
Caliper #3
Between
Caliper and
Swingarm #4
1.490
RC
FBI151RCP
PM
STOCK
WELD
1.3”
STOCK
STOCK
STOCK
.475
FBI151RC
.530
.190
#1
#2
#3
Tire
Swingarm
Pulley
Spacer
Side #2
.125
HD106002
STOCK
STOCK
#4
DRIVE PULLEY
BRAKE CALIPER