Fire Magic 3593 New Ice Maker - Manual (Page 14)

REV 1 - 1401311400 L-C2-393 14
INSTALLATION (cont.)
INSTALLATION TYPES
This ice maker has been designed for Mobile (free-standing), Enclosed (as under a cabinet) or Built-in
(sealed) installation, indoor or outdoor. In any case, there must be adequate air space around the unit
for proper ventilation. (See diagrams in the LOCATION REQUIREMENTS section.)
Mobile Installation
A mobile installation will allow you to install the ice maker free-standing in any place you desire provided
you have access to a water supply. You must follow the stated instructions for:
a. Electrical requirements
b. Water supply
c. Leveling the ice maker
Enclosed Installation
An enclosed installation will allow you to install the ice maker under a cabinet or inside a kitchen cabinet
provided the required clearance space around the ice maker is respected. This installation has the
same requirements as a mobile installation.
Built-in Installation
If this method of installation is chosen, it will still be necessary to allow adequate ventilation space
around the unit. The following additional items must be observed.
1. Place ice maker in front of installation location. Remove the legs and place the unit fl at on the fl oor
or on a platform depending on your installation requirements.
2. The water supply line must be plumbed before connecting to the ice maker.
3. Connect the drain hose.
4. Turn on main water supply and tap. Check for water supply connection leaks. Tighten every
connection (including connections at the water inlet).
5. If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker.
6. Push the ice maker into position.
7. Seal all around the cabinet to the fl oor with an approved caulking compound.