Fire Magic 3593 New Ice Maker - Manual (Page 24)

REV 1 - 1401311400 L-C2-393 24
CLEANING AND MAINTENANCE (cont.)
Smaller Ice Setting:
By pressing the CLEAN button, you can decrease the size of the ice cubes. The ICE FULL LED
(red) will fl ash as you lower the ice size and will fi nally be blinking at the setting of smallest ice
size. 5 small settings are available [below the regular (middle) setting].
Larger ice setting:
By pressing the MODE button, you can increase the size of the ice cubes. The ICE HARVEST
LED (yellow) will fl ash as the larger size is set and will blink when the setting of largest ice size
has been reached. 5 Large settings are available [above the regular (middle) setting].
After 10 seconds without any operation, the unit will automatically memorize the current state and
return to the previous mode.
Note: During the ice size adjustment, the "ICE FULL", "ICE MAKING" and "ICE HARVEST" LEDs
blinking all at once indicate that the unit is in the regular (middle) setting of the ice size.
Note: When the machine is in the cleaning stage or ice full stage, the ice size is not available for
adjusting.