Flowserve PLUS 5Q - Manual (Page 16)

Flow Control
Nordstrom Valves
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely
during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service
conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume
the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation
Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of
satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is
continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these
provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.
For more information about Flowserve Corporation, contact www.flowserve.com or call USA 1 800 225 6989.
© 2005 Flowserve Corporation, Irving, Texas, USA. Flowserve and Nordstrom Valves are registered trademarks of Flowserve Corporation. FCD NVAIM2003-00 Printed in USA.
Authorized Distributors
For detailed information on these and other Nordstrom products, call your customer service
representative for the name and number of the nearest authorized Nordstrom distributor.
Flowserve Nordstrom Valves
1511 Jefferson Street
Sulphur Springs, Texas 75482
USA
United States
Telephone: 903-885-4691 or 4693
FAX: 903-439-3411
Latin America
Telephone: 903-439-3407
FAX: 903-439-3411
Other Countries
Telephone: 903-885-4692
FAX: 903-439-3404
Flowserve Corporation
1-800-225-6989
Email: [email protected]
or visit www.flowserve.com