Flowserve HV 215 - Manual (Page 9)

9
Important Notes
– continued –
The configuration of the loading and unloading system HV 25 mounted to the tank car carrying pressurized
gas meets the requirements of DIN 26026 or of EN 256-3.
The bottom valves HWV 205/- DN 80 and HWV 25/- DN 80 fulfill the legal requirements of the RID / GGVSE sec-
tion 6, constituting the first inner shut-off as defined in these regulations.
Legal regulations
Any use of naked flames is expressly forbidden!
Before perfomring any service work inside the tank make sure that the tank is sufficiently ventilated
and all gases have been completely vented. The rules concerning MAC (= maximum allowable
concentration) values at place of work must be strictly applied!
Warning