Flowserve NRS 2-3 - Manual (Page 10)

10
Tools
■ Screwdriver for slotted screws, size 2 mm, 5 mm, completely insulated to VDE 0680
Installation
Design “b”
1. Drill four holes into the mounting panel of the control cabinet.
2. Put level switch onto the mounting panel and align.
3. Insert matching screws and fasten.
Design “c”/“d”
1. Install guide rails and screw-type connector into 19" mounting panel.
2. Insert 19" slide-in unit into the guide rails until it hits the stop.
3. Fasten the fixing screws . J