Fluke Biomedical ASM-990 Series - Manual (Page 13)

Operation
Basic Operation
2
2-5
Figure 2-7. Rate Unit Sub-Menu
Integrate Sub-Menu
If “INTEGRATE” is selected from the “MODES SUB-MENU,” the operating mode is then set to
“INTEGRATE” and “INTG UNIT SUB-MENU” will appear on the screen (see Figure 2-8). The integrate
unit selections are identical to those for the rate unit setting. The integrate time is fixed to seconds.
Figure 2-8. Integrate Unit Sub-Menu
Scaler Mode
When “SCALER” is selected from the “MODES SUB-MENU” the screen will display the items as shown in
Figure 2-9. The user can then select either the “MEASUREMENT” or “TIME” mode from the “SCALER
SUB-MENU,” along with the measurement unit, time unit, and scaler value. The “METHOD” selection
allows the user to select either the “COUNTING-UP”, or “COUNTING-DOWN” mode. When the user
selects the scaler value, the units chosen on the “SCALER UNIT SUB-MENU” and “SCALER TIME UNIT”
will be displayed on the “SCALER VALUE” screen (see Figure 2-10, 2-11, 2-12, 2-13, and 2-14).
Figure 2-9. Scaler Sub-Menu
INTG UNIT SUB-MENU
Roentgen
COUNTS
Sv
disintegrations
SCALER SUB-MENU
SCALER MODE
METHOD
SCALER MODE
BASED ON MSNT.
BASED ON TIME