Dish Network Solo 351 User Manual
Page 59
Chapter 3
Page 54
Using the System
Setting Up a Manual Event Timer
1. Press the MENU button.
2. Select the
Timers
option.
3. Select the
Create
option. The receiver displays the
Create a Manual
Event Timer
menu.
4. Select a
Timer Type
option.
Note
: VCR timers are available through TV1 menus only.
5. Select a
Timer Frequency
option.
6. Select a channel by doing one of the following:
•
Highlight a channel using the UP or DOWN ARROW button.
Then, press the SELECT button.
•
Enter a channel number using the NUMBER PAD buttons.
7. Select the
Edit Time
option. The receiver displays the
Set Date/Time
for
Manual Timer
menu.
8. Use the NUMBER PAD buttons to enter the
Start Time
(this includes
selecting AM or PM) and the
End Time
, (this includes selecting AM or
PM).
9. Use the NUMBER PAD buttons to enter the
Date
.
10. Select the
Create Timer
option.
11. To create another event timer, do one of the following:
•
Select the
Create
option again.
•
If you do not want to create another event timer, press the CANCEL
button.
Note
: You cannot set a manual event timer for a pay per view event.
Overlapping Timers
If you try to create event timers for overlapping programs, the receiver
displays a screen with the dates and times of both programs. The receiver
also displays this screen if a program time has changed, causing one timer to
overlap another. You must delete, edit, or skip one of the timers.