Dish Network Solo 351 - Manual (Page 85)

Chapter 3
Page 80
Using the System
Control a Tuner or Amplifier
Only the buttons described here control a tuner or amplifier. Some of the
buttons described here may not control your tuner or amplifier. Please see
the user’s manual that came with your tuner or amplifier for more
information.
AUX Mode Button
You must first set up the remote to control the device. See Set Up the Remote
to Control Devices, beginning on page 72. Then, you must press the AUX
mode button to set the remote to AUX mode. The AUX mode button flashes
once to show you’ve set the remote to AUX mode. Make sure you keep the
remote in AUX mode to use the buttons described here. Refer to TV Mode
Button and VCR Mode Button, as appropriate, for the buttons available for
use in AUX mode.
Power Button
Press the blank POWER button to turn the tuner or amplifier on or off.
Mute Button
Press the MUTE button to turn the sound off or on.
Volume Button
Press the VOLUME button to raise (+) or lower (-) the volume.
Up and Down Arrow Buttons
Use UP and DOWN ARROW buttons to change channels on the tuner or
amplifier.
Select Button
The SELECT button works as the INPUT SELECT button for the tuner or
amplifier.