Dish Network Solo 351 - Manual (Page 70)

Page 65
Using Locks
4. Select the Channel Locks option.
5. Highlight the channel that you want to lock. If necessary, press the UP
or DOWN ARROW button to see the channel. You can also enter each
channel number using the NUMBER PAD buttons.
6. Press the SELECT button to lock or unlock the highlighted channel. If
the box next to the channel has a mark, the channel is locked.
7. Select the Done option to save the changes.
8. If the receiver is not already locked, you must lock it to put the locks
you just created into effect by selecting Lock System .
Locking and Unlocking the Receiver Front Panel (TV1 Only)
This keeps anyone from changing the channel, but it does not lock the
remote control buttons. This option is only available on TV1 menus.
1. Press the MENU button.
2. Select the Locks option.
3. If the receiver is locked, enter the password using the NUMBER PAD
buttons. The receiver continues to display stars (*) as you enter the
digits of the password. As soon as you enter the fourth digit of the
password, the receiver highlights the OK option. Press the SELECT
button.
4. Select the Front Panel Lock option to lock or unlock the front panel.
Tip: Remote
Control 1 is used to
control TV1 menus
on the nearby TV.
Remote Control 2
is used to control
TV2 menus on the
remote TV(s).