Dish Network Solo 351 - Manual (Page 87)

Chapter 3
Page 82
Using the System
5. Press the POUND (#) button.
The TV mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the
VOLUME button.
The TV’s volume changes and the TV mode button
lights instead of the AUX mode button.
Testing the System
Starting a Test
1. Press the MENU button.
2. Select System Setup .
3. Select Diagnostics .
Telephone Connection Test
This test checks that the receiver telephone connection is correct. Select the
Connection option to begin the test. The receiver displays a message asking
you to wait until the test is done.
• If the telephone connection is correct, the receiver displays a Phone
Connection OK message.
• If the receiver highlights the Done option, select the Dial Out option so
the receiver can make a toll-free call to the Customer Service Center.
The receiver displays a message asking you to wait until the call is done.
When the call is done, select the Done option to exit the test menu.