Fronius String Control 250/30 - Manual (Page 30)

28
* Silicone tube Ø 25 x 510 mm
1
3
2
DA
TCOM IN
DA
TCOM OUT
3
5 Nm
2
1
3
4
NOTE! Procedure if there is only 1 data communication cable connected to the
Fronius String Control 250/30 (e.g. because the Fronius String Control 250/30 is
the last component in a Fronius Solar Net):
-
Attach the terminating plug to the free RJ 45 connection; the terminating plug
is supplied as standard with every Fronius Datalogger.
- Insert the plastic bolt supplied as standard with the Fronius String Control
250/30 into the free opening in the rubber insert.