Specifications – GAI-Tronics 785-002  24 V DC Explosion-proof Page/Party Handset Stations User Manual

Page 10

Advertising
background image

Pub. 42004-157E

Model 780/785-002 and 7805/7855-002 24 V DC Explosion-proof Handset Stations

Page 10 of

13

f:\standard ioms - current release\42004 instr. manuals\42004-157e.doc
08/13

Specifications

Power input ......................................................... 21–29 V dc; 1.2 A (optional negative ground or floating)

Dimensions:

Indoor stations .......... 13.1 H

 7.9 W  5.6 D (8.9 including handset) inches; (332  200  143 mm)

Outdoor stations .......................................... 14.6 H

 10.9 W  10.5 D inches; (371  276  226 mm)

Temperature range ............................................................................ −22° F to +158° F (−30° C to +70° C)
Shipping weight ............................................................ Indoor: 27 lbs. (12.2 kg); outdoor: 35 lbs. (15.9 kg)

Handset
Material/finish ................................................................................................................................ Gray ABS
Microphone ............................................................................................ 10 ohms, noise-canceling, dynamic
Receiver .......................................................................................................................... 150 ohms, dynamic
Cable ............................................................................ Retractile with sealed elbow, 6-foot extended length

Handset Amplifier
Output ......................................................................................................... 1.5 V nominal into 33-ohm load
Gain .................................................................................................................................... 55 dB, adjustable
Frequency response ................................................ 250–4000 Hz, +0/−3 dB ref @ 1 kHz (1.5 V

RMS

) output

Distortion ..................................................................................................... 1.5% maximum THD @ 1 kHz
Preset adjustments .................................................. Microphone gain, sidetone adjustment, receiver volume

Speaker Amplifier
Output ......................................................................

@

25 V dc: 12 watts minimum into 8- or 16-ohm load

Voltage gain ....................................................................................................... 20 dB minimum, adjustable

Frequency response ............................................................... 250–4,000 Hz; +0/−3 dB ref @ 1 kHz

Distortion .......................................................................................... 1% maximum THD @ 1 kHz/12 watts
Input impedance ......................................................................................... 50,000 ohms minimum @ 1 kHz
Controls, preset adjustments ................................................................................................. Speaker volume

Explosion-proof Enclosure
Material/finish ...................................................................................................... No. 359.2 Aluminum alloy
Mounting ...................................................................... Wall or column, four 3/8-inch slotted mounting feet
Connections................................................................................. Internal screw-type barrier terminal blocks
Conduit entry ................................ Standard hole size top: ¾ NPT; standard size hole bottom 1½-inch NPT

Weatherproof Enclosure
Material/finish ....................................................................................................... Glass-reinforced polyester
Mounting ................................................................................................................................ Wall or column
Environmental rating .................................................................................................................... NEMA 4X

Approvals
NRTL certified for use in US and Canada ................................................... Class I, Div. 1, Groups C and D

Class II, Div. 1, Groups E, F, and G

Class III, Div. 1

Advertising