Maintenance, Specifications, Adjustment – GAI-Tronics 751-001 Page/Party Speaker Amplifier User Manual

Page 2: Troubleshooting

Advertising
background image

Pub. 42004-210B

751-001 Page/Party

®

Speaker Amplifier

Page:

2 of 3

f:\standard ioms - current release\42004 instr. manuals\42004-210b.doc
04/09

Adjustment

The 751-001 Speaker Amplifier mates with an enclosure wired directly to a speaker. The speaker volume
adjustment is located under the GAI-Tronics nameplate on the front panel. Refer to Figure 1. Use a small
flat-blade screwdriver to adjust the speaker sound volume.

Maintenance

The following table lists some hints to aid technicians in troubleshooting:

Troubleshooting

Problem

Solution

Feedback/distortion (a hum or
buzz on the line) occurs during all
Page/Party

®

station operation.

The line may be improperly terminated. Inspect the system cable

for loose connections, shorts, and grounds. Line balance assembly
connections are critical.

Associated speaker level requires
adjustment.

Adjust the speaker volume control located on the amplifier front

panel, behind the nameplate. Refer to Figure 1. Use a small
standard screwdriver to perform these adjustments.

Specifications

Power input ..................................................................... 90–140 V ac range, 50/60 Hz, 120 V ac nominal

Power consumed.............................................................................................Zero signal: 10.5 VA, 5.3 W

Maximum signal: 58 VA, 29.5 W

Construction/Finish.................................................................16-gauge cold-rolled steel/gray polyurethane

Amplifier output ................................. Push-pull, Class B, 12 watts minimum, with nominal supply voltage

Amplifier sensitivity............................................................................................ 0.5 V ac, for rated output

Frequency response..................................................................... 250–4,000 Hz, +0/-3 dB ref. to 1,000 Hz

Distortion ......................................................................................... 1% max. THD @ 1,000 Hz, 12 watts

Input impedance........................................................................................................ 50,000 ohms nominal

Controls........................................................................... Speaker volume (adjusted through an access hole

behind the nameplate on the front panel)

Temperature range............................................................................ -22° F to +158° F (-30° C to +70º C)

Dimensions................................................................8.1 H

× 8.1 W × 3.0 D inches; (206 × 206 × 76 mm)

Packaged weight ................................................................................................................4.8 lbs. (2.2 kg)

Net weight .........................................................................................................................3.9 lbs. (1.8 kg)

Advertising