Specifications – GAI-Tronics 723-003 24 V DC Remote Handset/Speaker Amplifier User Manual

Page 5

Advertising
background image

Pub. 42004-259E

Model 723-003 24 V DC Remote Handset/Speaker Amplifier

Page

5 of 6

f:\standard ioms - current release\42004 instr. manuals\42004-259e.doc
04/13

Specifications

Power input, voltage .......................................................................... 21–28.8 V dc range, 25 V dc nominal
Power consumed ............................................................................................................ Zero signal: 2.75 W

Maximum signal: 27 W

Construction/Finish................................................................ 16-gauge cold-rolled steel/gray polyurethane

Handset Amplifier

Output level .................................................................................... 1.5 V

RMS

nominal into 33-ohm load

Output limiter .............................................................................................................. 1.5 V

RMS

nominal

Gain ................................................ 55 dB nominal (below limiter level); adjustable from 40 to 63 dB
Frequency response .................................................................... 250–4,000 Hz, +0\–3 dB ref. @ 1 kHz
Distortion ............................................................................................... 1.5% maximum THD @ 1 kHz
Controls ...................................................................... Microphone gain, receiver volume, and sidetone

(adjusted through the access holes on the rear surface of the unit.)

Speaker Amplifier

Output ........................................................................................ Push-pull, Class B, 12 watts minimum,

with nominal supply voltage

Amplifier sensitivity ......................................................................................... 0.5 V ac, at rated output
Frequency response .................................................................... 250–4,000 Hz, +0/–3 dB ref. @ 1 kHz
Distortion .................................................................................................. 1% maximum THD @ 1 kHz
Input impedance ................................................................................................... 50,000 ohms nominal
Controls ............................................................................ Speaker volume (adjusted through an access

hole behind the nameplate on the front panel)

Temperature range ...................................................................... −22

 F to +158 F (−30 C to +70 C)

Dimensions ........................................ 8.1 H

 8.1 W  3.0 D inches behind panel (3.5 D in front of panel)

(206

 206  76 [89] mm)

Shipping weight .................................................................................................................... 5.6 lbs. (2.6 kg)

Approvals
NRTL certified for use in US and Canada.............................................. Class I, Div. 2, Groups A, B, C, D,

when mounted into a certified GAI-Tronics Model 7245 Amplifier Enclosure

Temperature Code..................................................................................... T3C (Maximum ambient = 70º C)

CE Mark

Advertising
This manual is related to the following products: