GAI-Tronics 7335-006 Multi-Party Outdoor Non-Metallic Amplifier Enclosure (CE Mark) - Manual

Pub. 42004-373B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 7335-006 Multi-Party Outdoor
Non-metallic Amplifier Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 7335-006 Multi-Party Outdoor Non-metallic Amplifier Enclosure is a component of the 700
Series Page/Party< System. It is constructed of glass-reinforced polyester and is extremely weatherproof
and corrosion-resistant. This enclosure is equipped with terminal strips for connecting system cable.
The Page/Party
® series amplifiers mate directly with this enclosure.
Installation
CAUTION
Do not install this equipment in hazardous areas or areas other than those
indicated on the approval listing in the “Specifications” section of this manual. Such installation
may cause a safety hazard and consequent injury or property damage.
WARNING
Do not disconnect equipment while energized.
Insure proper grounding to protective earthing.
When installing an add-on station, consult the appropriate system layout diagrams. These figures, when
used in conjunction with the station installation information and cable layout guide, should provide all
the information necessary to install additional Page/Party< stations.
Enclosure Placement
All GAI-Tronics Page/Party ® units are wired in parallel. Good system layout design minimizes the cable
required for each installation. GAI-Tronics multi-conductor cable, designed especially for this
application, is recommended. For the number, size, and color-coding of conductors refer to the
appropriate system connection diagrams.