GAI-Tronics DHF-102 Digital Intercom Staitons - Manual (Page 6)

Pub.: 42004-383D
M ODEL DHS/DHF S ERIES D IGITAL I NTERCOM S TATIONS Page 4 of 24
f:\standard ioms - current release\42004 instr. manuals\42004-383d.doc
11/10
Description of Major Components
The Digital Intercom Stations are made up of a front panel assembly and a rear enclosure.
The following assemblies are mounted on the interior side of the front panel:
• 69539-00X Audio/Interface PCB Assembly.
• 69547-00X Intercom PCB Assembly
Refer to Figure 5 below. The front panel contains the user interface components (microphone, speaker,
status LED, keypad, and handset) in addition to the 69539-00x Audio/Interface PCBA that provides all
terminations except earth ground. This PCBA also contains controls for volume, gain, and switch
configuration.
The 69547-00x Intercom PCBA connects to the Audio Interface PCBA from below to transmit/receive
audio, data, and control information to and from the central control cabinet. The rear enclosure protects
the electronics from the harsh environment, and also contains the termination for earth ground.
Figure 5. Front Panel Assembly with Intercom and Audio Interface PCBAs