GAI-Tronics 7335-001 Page/Party Weatherproof Non-Metallic Multi-Party Amplifier Enclosure (115 V AC) - Manual

Pub. 42004-419B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
7335-001 Multi-Party Weatherproof
Non-Metallic 120 V AC Amplifier Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may
not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This manual applies to the GAI-Tronics 7335-001 Multi-Party Weatherproof Non-Metallic 120 V AC
Amplifier Enclosure, which is an important component of the 700 series Page/Party
< system. This
enclosure is configured for multi-party systems and can accommodate conversations on up to five party
lines simultaneously.
The 7335-001 Enclosure is made of glass-reinforced polyester, which is extremely weatherproof and
corrosion-resistant. It is equipped with terminal strips for connecting system cable. The 701 and 751
Series Amplifiers mate directly with this enclosure.
Installation
CAUTION
Do not install this equipment in hazardous areas other than those indicated
on the approval listing in the “Specifications” section of this manual. Such installation may cause a
safety hazard and consequent injury or property damage.
When installing an add-on station, consult the system layout diagram at the end of this manual. This
figure, when used in conjunction with the station installation information and cable layout guide, should
provide all the information necessary to install additional Page/Party
< stations.
Enclosure Placement
All GAI-Tronics Page/Party ® units are wired in parallel. Good system layout design minimizes the cable
required for each installation. GAI-Tronics multi-conductor cable, designed especially for this
application, is recommended. The number, size, and color-coding of conductors are listed in the
accompanying system connection diagram.
System layout and power cable length are very important when installing Page/Party < equipment.
Although it varies for different systems, the general guideline is that the total power cable length should
not exceed 1 mile (5280 feet) for 120 V ac systems. The total cable length is the most important
consideration while cable length between the stations is generally not a factor.