GAI-Tronics 732-101 Page/Party Weatherproof Aluminum Single-Party Amplifier Enclosure (115 V AC) - Manual (Page 2)

Pub. 42004-425A
732-101 Single-Party Weatherproof Aluminum 115 V AC Amplifier Enclosure Page: 2 of 7
f:\standard ioms - current release\42004 instr. manuals\42004-425a.doc
04/09
Mounting
The 732-101 Single-Party Weatherproof Aluminum Enclosure is supplied with pre-drilled cable openings
and conduit hubs with top and bottom cap plugs in place to prevent contamination.
For specific details including mounting hole dimensions, refer to Figure 1. When mounting the enclosure,
use caution to avoid damaging the terminal blocks inside. The suggested mounting height for all station
enclosures is 54 inches (137 cm) up to the centerline of the enclosure.
Figure 1. 732-101 Single-Party Weatherproof Aluminum Enclosure Mounting