GAI-Tronics 10959-908 Rack-Mount Audio Messenger Interfaces - Manual (Page 7)

Pub. 42004-487A
M ODEL 10959-906 & 10959-908 R ACK -M OUNT A UDIO M ESSENGER I NTERFACES P AGE
5 of 18
f:\standard ioms - current release\42004 instr. manuals\42004-487a.doc
01/14
The telephone interface has multiple operational modes that are configurable via the AMI Configuration
Tool software application. The modes of operation are as follows:
Model 10959-906
• Record Page – Records a message and delivers it to the audio line output
• Live Page Mode – Delivers a live voice message (not pre-recorded) to the audio line output.
• Manual/Disabled – Do not use.
Model 10959-908
• Page/Party ® – Delivers a live voice page (not pre-recorded) to the page line output. The party line is
held open following the page.
• Record Page – Records a page, and delivers it to the page line output.
• Mixed Mode – Records a page, delivers it to the page line output, and holds the party line open
following the page.
• Live Page Mode – Delivers a live voice page (not pre-recorded) to the page line output. The party
line is not open following the page.
• Ring Mode – Does not deliver a page, but instead plays a configured message on the page line to
signal the incoming call.
• Manual/Disabled – The Telephone Interface does not automatically answer a phone call. However,
an input can be configured for “Manual Access” to allow an attendant to manually answer the phone,
and transfer calls to a party line.
The AMI can support two modes of operation: Day and Night Mode. The day and night modes can be
configured independently of each other.
As an example of the Day and Night modes, day mode may be configured to allow callers the ability of
paging and subsequent party line communications. The night mode may be configured to play a tone over
the paging system alerting personnel of an incoming call. In this mode, the call can be answered at any
Page/Party
® station.