GAI-Tronics 10457-010 Card Rack Assembly - Manual

Pub. 42004-627L2D
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 10457-010
Card Rack Assembly
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 10457-010 Card Rack Assembly is a component of the SmartSeries system that is used for
public address, intercommunication, and emergency notification.
How to Use the Assembly
Application
The Model 10457-010 Card Rack contains an internal ac power supply. The card rack is capable of
housing one or more SmartSeries printed circuit board assemblies (PCBAs). The quantity of PCBAs
varies depending on the system architecture.
Connectors and cable assemblies are used to interface the card rack, the Master Control Unit, and the
PCBAs. The Model 10457-010 mounts easily into a standard EIA 19-inch rack. The card rack’s power
supply requires an input voltage of 120 V ac/240 V ac (auto-switchable), 50/60 Hz. The power supply
allows the card rack assembly to be used in almost all installations.
There are no user controls on the card rack assembly.