GAI-Tronics 7245-004 SmartSeries Indoor Remote Subset Amplifier Enclosure - Manual (Page 2)

Pub. 42004-644L2DQG
7245-004 Indoor Remote Subset Amplifier Enclosure Quick Installation Guide Page: 2 of 2
f:\standard ioms - current release\42004-xxxxqg quick guides\42004-644l2dqg.doc
07/12
Problem Solution
Remote subset is
inoperable.
 Verify that the connector of the remote subset is securely connected to the subset receptacle of the enclosure.
 Remove the amplifier from the enclosure. Re-install the amplifier ensuring the enclosure connector and the
amplifier connector are aligned properly.
Auxiliary inputs do
not operate.
 Remove the amplifier and verify the lugged auxiliary input wires are properly terminated on terminal points
TB1-10 and TB1-11 respectively.
 Verify the auxiliary inputs have been enabled in the system software.
Approval ............... NRTL certified for use in US and Canada .................................................................................... Class I, Div. 2, Groups A, B, C, D
Figure 1. Outline and Connection Detail
Figure 2. Wiring Details