GAI-Tronics 7245-004 SmartSeries Indoor Remote Subset Amplifier Enclosure User Manual
Confidentiality notice, General information, System requirements and limitations
Pub. 42004-644L2D
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
7245-004 Indoor Remote Subset
Amplifier Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The 7245-004 Indoor Remote Subset Amplifier Enclosure is intended for use in GAI-Tronics Page/Party
®
and SmartSeries systems. This enclosure enables the amplifier, speaker, and field cabling of subset
stations to be remotely mounted. It is constructed of fabricated steel and is equipped with a 24-position
remote subset connector.
System Requirements and Limitations
For proper operation, the 7245-004 Amplifier Enclosure must be installed with a subset and amplifier
from the following list:
Subsets: Amplifiers:
726-101 Single Party Desktop Subset
723-001 Remote Subset Amplifier
7265-101 Multi-Party Desktop Subset
723-901 SmartSeries Remote Subset Amplifier
711-102 Single Party Desk-Edge Subset
7115-102 Multi-Party Desk-Edge Subset
716-102 Single Party Flush-Mount Subset
7165-102 Multi-Party Flush-Mount Subset
The amplifier enclosure must be mounted within 8 feet of the subset due to the subset cable limitations.
In addition, the amplifier enclosure must be mounted at an indoor location - the amplifier enclosure is not
designed for outdoor use.