GAI-Tronics ICS Hazardous Area Page/Party Stations - Manual (Page 27)

Pub. 42004-723L2G
ICS Hazardous Area Page/Party
®
Station Page 25 of 31
f:\standard ioms - current release\42004 instr. manuals\42004-723l2g.doc
11/14
Troubleshooting
Opening the Station
WARNING
Before performing any of the following settings and adjustments, remove all
power from the station.
WARNING
To reduce the risk of hazardous atmospheres, disconnect the equipment
from the supply circuit before making any adjustments to the amplifier’s handset level.
Remove all cover bolts from the enclosure. Swing the front door open to access the internal PCBAs.
Jumper Settings
P4 Standard Jumper Configuration
For standard operation, without options, P4 requires jumper installation for proper operation. See Figure
18 for jumper locations.
Figure 18. P4 Jumper Default Settings