GAI-Tronics 10416-102, 10416-103 Headset Extension Cables - Manual

Pub. 42003-123B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Extension Cable
Replacement Kit
M
ODELS
10416-102, 10416-103, 10416-104
AND
10416-105
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The 10416 Series Extension Cables, when used with a Model 10401-201 Headset, permit two-way
communications at a distance from a GAI-Tronics handset/speaker amplifier station.
The Model 10416-102 Extension Cable is equipped with a 4-pin male connector for use with special
Model 600 Series Handset Amplifier Stations. The Model 10416-103, 10416-104, and 10416-105
Extension Cables are equipped with a 6-pin male connector for use with Model 700 Series
Handset/Speaker Amplifier stations, and a push-to-page switch on the belt clip to permit paging on a
Page/Party
®
system.
N OTE : Extension cable Models 10416-102 through 10416-105 require installation of the Model
12590-002 Headset Upgrade Kit to permit use with earlier headset Models 10401-101 and 10402-101.