GAI-Tronics 12586-002, 12586-003, 12586-004 Harness Plate Assembly (702AA, 733-001A, 758-001A) - Manual (Page 2)

Pub. 42003-137A
H ARNESS A SSEMBLY R EPLACEMENT K IT Page: 2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-137a.doc
2/97
Installation
Indoor Enclosure (Model 12586-002)
1. Remove and discard the harness assembly (TB1), the
connector (J1), and the associated hardware. See Figure 1.
N
OTE : Do not remove TB2.
2. Install the harness assembly plate by aligning the plate with the
holes used to mount the previous TB1. Secure the assembly
using the 2 screws included in the kit.
Weatherproof Enclosures (Models 12586-003
and 12586-004)
1. Remove the label on the front cover of the enclosure, and discard it.
2. Remove and discard the harness assembly (TB1), the connector (J1), and the associated hardware. See
Figure 2 and Figure 3.
N OTE : Do not remove TB2.
3. Install the harness assembly plate by aligning the plate with the holes used to mount the previous TB1.
Secure the assembly using the 2 screws included in the kit.
Figure 1. Indoor Enclosure
Figure 3. Weatherproof Enclosure
Cast Aluminum
Figure 2. Weatherproof Enclosure
Glass Reinforced Polyester