GAI-Tronics 12513-008 Valox Door Kit - 351 - Manual

Pub. 42003-152
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Valox ® Door Replacement Kit
M
ODEL
12513-008
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is for use on the Model 351 telephone. This kit includes the following components:
Qty Description
1 Door with latch
4 Stainless steel screw
4 1/4-inch washers
1 Left lift-off hinge
1 Right lift-off hinge
You will need a 1/4-inch Allen wrench to install this kit.
Installation
1. Open the enclosure door to access the hinge screws.
2. Loosen and remove the two screws fastening the lower hinge on the mid-section of the enclosure, and
remove the hinge.
3. Lift up and remove the old door.
4. Position the new door by mating the upper hinge halves.
5. Mate the lower enclosure hinge with the lower door hinge. Fasten with the two screws.
6. Adjust as needed by loosening the screws, shifting the hinge, re-tightening the screws, and re-closing
the door.